Replacement E100-GP E100-HE E100-AC Filter for Parker

Replace Parker compressed air filter   

E100-GP E100-HE E100-AC

The filter housing is die-casted from aerospace grade silicon-aluminum alloy material.The structure is tight.The pressure is tested by the national laboratory with a pressure of 4.0Mpa to ensure that the filter is sealed under the condition of 16bar.Each filter housing is cleaned,degreased and passivated before spraying.The surface is electrostatically sprayed with a strong,pressure-resistant epoxy coating for good corrosion protection.

Precision Filter Element uses borosilicate fiber filter material and porous glass fiber filter equipment. The outer layer is made of polyester fiber layer,which is resistant to high temperature and chemical corrosion,ensuring efficient filtration and minimum pressure loss.It is equipped with all kinds of high-precision gas equipment,all kinds of first-line brand air compressors,post-processing,laser cutting equipment,instrument gas,medical equipment,food equipment and so on.

High Quality Raw Materials,Cost-Effective,Reduce maintenance Cost.

Direct Replacement & Product Compatibility 100%.

Ensure To Meet Original Manufacturing Standard.

Notes

Grade GP - General Purpose Protection Particle removal down to 1 micron including coalesced liquid water and oil, providing a maximum remaining oil aerosol content of 0.6 mg/m3 (<0.5 ppm) @ 21°C.

Grade HE - High Efficiency Oil Removal Filtration

Particle removal down to 0.01 micron including water and oil aerosols, providing a maximum remaining oil aerosol content of 0.01 mg/m3 (<0.01 ppm) @  21°C. (Precede with Grade GP filter).

Grade AC - Activated Carbon Filtration

Oil vapour and hydrocarbon odour removal, giving a maximum remaining oil content of <0.003 mg/m3 (<0.003 ppm) (excluding methane) @ 21°C. (Precede Grade AC with Grade HE filter).