The sintered metal powder filter element is made of metal powder as raw material, after cold isostatic pressing through high-temperature vacuum sintering. Compared with filters made of paper, copper wire mesh and other fiber cloth, the performance is superior and is easy to assemble, disassemble and clean.

Because the metal powder is a selected spherical metal powder, the sintered metal powder filter element can achieve micron-level precision filtration, and can exert uniform surface filtration performance for the filtration particle size of 0.1-100μm, and can separate solid particles in liquid and gas. When the fluid passes through a certain precision filter element, the impurities are blocked on the surface of the filter element to form a filter cake, and the pure fluid flows out through the filter element, so that the contaminated or impurity containing fluid can be cleaned to the state required for normal production, so as to ensure that the downstream device can obtain pure products or the normal operation of the protection equipment. its heat resistance can also be applied to continuous filtration from -200℃ to 900 ℃, because of its good permeation filtration performance and high filtration accuracy, as well as certain strength and toughness, Therefore, the metal powder sintered filter element is widely used in the filtration of gas, liquid and fuel oil in the petroleum, chemical, automobile, tractor, aircraft, and shipbuilding industries. It can also be used as a filter element for pneumatic and hydraulic circuits.

The stainless steel powder sintered filter element is an order-produced filter element. This 1524mm long metal powder filter element ordered by Indian customers has an accuracy of 1 micron，the material is SS 316L with flange connection。