AIDA metal felt filter media is made with thin filaments of nonwoven stainless steel. These Sintered Pleat Filter are ideal for high pressure, highly corrosive, highly viscous or radioactive applications. They feature extremely high porosity (up to 85%), high flow rates (up to 20 times higher than other media types), and very long life.
These elements are the same we use in our high pressure filter assemblies, which are often employed in highly challenging applications.
Random fiber filtration (metal felt) can provide absolute particle retention, longer on stream time and high dirt-holding capacity for under 60 micron filter elements. Although more expensive, it oftens offers clear advantages over wire cloth, sintered metal or non-metallic fibers. Its high temperature, high pressure and corrosion resistance combined with almost unending cleanability, make it highly economical for hostile environments.
AIDA Metal Felt Filter Element Specifications
AIDA metal felt filter elements have a random matrix of 316-L stainless steel filaments with diameters from 4 to 25 microns. The finer the micron, the more open area is provided in a pure crosshatch pattern. When sinter bonded, this random matrix can provide:
Extremely high porosity (up to 85%)
high flow rates: up to 20 times higher than other media types
long on-stream lifetime
downscaling is possible (less filter surface is needed to filter the same volume)
Low pressure drop: The high porosity of our metal fiber media allows a very low pressure drop (and thus lower energy cost), even at high filtration velocities
Ease of cleaning: The open structure of porous metal media allows you to clean in situ by backpulsing or backwashing
High strength: The sintering process creates strong fiber bonds and guarantees a high strength filter medium. Combined with an appropriate inner core, our filter elements can withstand thermal shock, high pressures, and frequent backpulsing.
Heat & corrosion resistance: Our filter media can be used in high temperature (up to 1000° C, depending on the alloy) and/or corrosive applications - where non-metallic textile, ceramic or polymer products fail
Can be used for surface or depth filtration. Our filter media enables you to achieve high efficiencies through a cake build-up (surface filtration) and also offer high dirt holding capacity for depth particles capture (depth filtration)
Stainless steel and other alloys available: not brittle, chemical cleaning is possible, weldable, low thermal expansion, maintains structure (no thermal shock) Depending on the performance you require, we select the proper alloy to provide the required resistance and strength
For filtration, the absolute filter ratings are:
for liquids — 1 to 80 µm
for air & gases — below 0.1 µm is possible
Applications
Polymer filtration: polyaramides, Kevlar®, polyesters, polypropylene, polyamide
Spinning polymers
Automotive:
air filters
lubricant filters
filters for air bag inflators
Chemical and catalyst recovery
High-temperature liquids
Cryogenic fluids
Solvents, ketones, esters, liquid hydrocarbons
Feed water and make-up water
Ethylene glycol
High-efficiency solids recovery or liquid recycling
Aerospace
Hot gas filtration
Medical and pharmaceutical
Hydraulic and fuel
Nuclear venting
Food and beverage:
Process steam filtration
Catalyst recovery from hydrogenation reactors
Polishing of syrups, liquors, and other liquids
Catalyst removal from flavor ingredients and other food specialties
Activated carbon removal and de-colorization
Burners: Made of high temperature resistant alloy, sintered metal fibers are used as radiation material for burner applications
Refinery: High flow rates in continuous operations typical in refinery applications
